Use

Portable Handheld

Portable Bench-top

Hazardous or Harsh Locations

Remote display for PLMa

Transmitter without display

Special Features

• -110°C to +20°C dewpoint range
• Fast, Accurate and Repeatable
• Built-in temperature compensation
• State-of-the-art electronics & software
• 316 Stainless Steel & PTFE wetted parts
• NIST calibrations

• Graphical display - Advanced User-friendly Interface, common to all instruments
• On-screen histogram and trend graph
• Continuous Status and Diagnostics display
• Optional Pressure Sensor (measures in vacuum or pressure) with automatic dewpoint correction
• Virtual Analyzer PC software for training and evaluation

• Robust Industrial M12 connector with IP68 protection

• Built-in Sensor desiccant store for rapid results
• USB data interface, also charges battery
• Programmable data logging
• Battery backed clock calendar
• Small & Lightweight

• Through the glass touch buttons
• Flow Control Orifice at Inlet/Outlet
• Built in serviceable/cleanable 100 micron Filter

• Built-in capability to drive digital outputs for PID heating, cooling and self calibrating valve solenoids.

• 1/8" Swage to SAE replaceable adapters

• Flow meter
• Metering valve

Other measurements

Temperature and
optional Pressure

Temperature and
optional Pressure

Temperature and
optional Pressure

Depends on transmitter

Temperature

Power

Rechargeable Battery
through Universal AC wall power and USB

Rechargeable Battery
through Universal AC wall power and USB

Three self configuring power modes:
1) 90-260VAC 47-440Hz or
2)12-24VDC 10VA or
3) 4/20mA Loop Powered

5-24VDC
4/20mA Loop powered

Serial I/O

USB, optional HART®

USB, optional HART®

isolated RS-422, optional HART®

HART®

Analog Out

4/20 mA option

4/20 mA option

4/20 mA option sink or source Isolated

4/20mA Loop Powered

Alarm Contacts

N/A

N/A

3 Alarm Relays:
3A, 250VAC contacts

4 Alarm Relays:
3A, 250VAC contacts

Built-in digital I/O for running external relays

Mounting

Handheld, with magnet and hook for temporary attachment

Bench-top,
carrying strap attachments provided

Direct on the pipe or on the panel mounting

DIN 43700 dimensional standard Panel cutout

On the sample cell

Process threads

1/8" tube Swagelok® compression fittings

many adapters
see data sheet

N/A

¾"-16 and 1/4"NPT
threads to sample cell

Operating
Pressure

150 psia (10.3 Bar)
option 500psia (34Bar)

2000psia (138Bar)inlet
50 psia (3.5Bar)outlet

5000 psia (345 Bar)

N/A

5000 psia (345Bar)

Weatherproof

IP65

Indoor use only

IP66 & IP68

Indoor use only

IP67

Enclosure material

Impact resistant
(>7 Nm to EN 50014)
Polyamide 12

Aluminum

Aluminum or optionally Stainless Steel, Glass lens

Flame resistant Noryl SE 1 GFN 1.

Stainless Steel

Dimensions

W: 4.17" (106mm)
H: 1.97" (50mm)
L: 7.36" (187mm)

W: 6.38" (162mm)
H: 3.32" (84mm)
L: 7.83" (199mm)

W: 5.8" (147mm)
H: 5.8" (147mm)
L: 8.9" (226mm)  

W: 5.67" (144mm)
H: 2.83" (72mm)
L: 4.35" (110mm)  

Dia:1.62"(41.3mm
L:3.25"(82.6mm)

Weight

1.75 lbs (0.8 Kg)

3.5 Lbs (1.6 Kg)

5.5 Lbs (2.5 Kg)

1.1 Lbs (0.5 Kg)

6 oz (0.17 Kg)

Hazardous
Location use

Enclosure ATEX hazardous area use (Ex II 2 G) approved (PTB 02 ATEX 1076U)

FM/CSA* Explosion Proof Certified Class I, Div I, Groups B, C & D Class II, III, Div 1, Groups E,F&G
ATEX Explosion Proof Certified ATEX 2 GD, Exd I & IIC; IECEx, Exd I & IIC
* CSA certificate 202993

US and ATEX
approvals pending